-
Originates and terminates primary rate ISDN calls at SW56, SW64,
Nx56/64 kb/s, HO, and H11 rates.
-
Captures ISDN D-Channel messages and displays in detailed or
brief format.
-
SNMP using 10Base2 and 10BaseT Ethernet Interfaces
-
Test
Mode
Performs
up to 23 simultaneous BERT tests with single Master Unit and
an additional 24 simultaneous BERT tests with a Slave Unit.
-
Provides dial-up loopback and predetermined test patterns of
N x 56/64K via the D-Channel of a primary rate interface.
-
Test D-Channel Layer 3 with preconfigured messages and cause
codes.
|
-
Thru
Mode
Bidirectional
protocol analyzer capability with access using RS-232C, Ethernet,
or through a B-Channel from remote TSI-1569 or equivalent.
-
Cross
Connect Mode
Receives
calls, terminates D-Channel, bonds (Mode1) if required and cross
connects the Network DS-1 to the Terminal DS-1 based on called
phone numbers.
- Monitor
Mode
Connected to the Digital Cross Connect in the C.O., the unit captures,
logs and analyzes all Bi-Directional D-Channel messages. Monitoring
of all the send and receive messages between the ISDN switch and
the customer.
|
